ESPAÑOLFRANÇAIS ITALIANO PYCCKOSanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA (6901-300039 <00>)Customer Service Europe: 31 (0)20 57
ENGLISH CAUTION: All four Threaded Studs must pass through the Center Plate for the installation to be safe.Using the previously removed Flange Nuts
ENGLISHStep 9: Hang the Television onto the Wall Plate CAUTION: Some televisions may require two people to lift. Sanus is not responsible for person
ENGLISHAssembly Instructions for Model: VMPL3Thank you for choosing a Sanus Systems VisionMount™ Wall Mount. The VMPL3 is designed to hold 27” to 84”
ENGLISHM4 x 16 mm Bolt - OQty. 4M5 x 16 mm Bolt - PQty. 4M6 x 16 mm Bolt - QQty. 4M8 x 16 mm Bolt - RQty. 4M4 x 35 mm Bolt - SQty. 4M5 x 35 mm Bolt -
ENGLISHLow Prole Monitor Brackets - See Diagram 1BTo install the Monitor Bracket Extensions (B) place the threaded stud portion through the Low Prol
ENGLISHNOTE: If you are using the Low Prole Monitor Brackets (F), proceed directly to Step 4 for televisions with a at back and Step 5 for televisio
ENGLISHStep 3: Attach Tilting Monitor Brackets to a television with a curved back or an obstruction near the threaded insert.Note: After Completing St
ENGLISHStep 4: Attach Low Prole Monitor Brackets to a television with a at back.NOTE: For televisions with a curved back, or an obstruction near the
ENGLISHStep 5: Attach Low Prole Monitor Brackets to a television with a curved back or an obstruction near the threaded insert.Determine the diameter
ENGLISHStep 6: Add Safety Bolts (Tilting Monitor Brackets only)Thread a Safety Bolt (I) into the bottom portion of each Tilting Monitor Bracket (D &am
Comments to this Manuals