Sanus-systems LF228 User Manual download pdf (Page 13)

6901-002114 <01>

6 Cable Management

002552.eps

LF228 - run cables

002552.eps

LF228 - run cables

002552.eps

LF228 - run cables

[29]

[03]

[01]

(C)

3. Pull each arm to its full extension then route the cables

through the arm, leaving enough slack to prevent

stretching the cables when the arm is moved.

4. Reattach covers (C).

1. Fully extend the arm [03]. Remove cable covers (C).

2. Install the cable tie clips [29] and ties [30] into the bottom

of the arm, as shown.

(C)

Troubleshooting and Maintenance

To remove the TV: (See illustrations in step 4.)

1. Unscrew the locking screw [22].

2. Push to release the locking tab (L).

3. Carefully lift the TV from the arm [03].

TV will not hold the downward tilt position and floats upward:

1. Adjust tilt tension setting (see step 5-3).

2. If the problem persists, use a bracket installation option that uses longer spacers (see step 1-4).

TV will not hold the home position and floats downward:

1. Adjust tilt tension setting (see step 5-3).

2. If the problem persists, use a bracket installation option that uses shorter spacers (see step 1-4).

[30]

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Sanus-systems LF228 User Manual Page 13