Sanus-systems LF228 User Manual download pdf (Page 9)

6901-002114 <01>

2 Wall Mounting

Solid concrete or concrete block

2-1 Mark the wall

2-2 Drill pilot holes

2-3 Insert anchors and lag bolts

001439.eps

Attach Plate to Wall

001439.eps

Attach Plate to Wall

002862.eps

13 mm

(1/2 in.)

10 mm

(3/8 in.)

89 mm

(3.5 in.)

Drill pilot holes as illustrated.

CAUTION:

Avoid potential injuries or property damage! :

Ù Pilot holes MUST be drilled to a depth of 89 mm (3.5 in.) using a

10 mm (3/8 in.) diameter drill bit.

Ù Never drill into the mortar between blocks.

Insert lag bolt anchors [26]. Then insert lag bolts [25] through the

wall plate [01] and into the anchors.

CAUTION:

Avoid potential injuries or property damage!

Improper use could reduce the holding power of the lag bolt. To

avoid potential injuries or property damage:

ÙBe sure the anchors [26] seat

flush with the concrete

surface.

ÙTighten the lag bolts [25]

only until the washers [27]

are pulled firmly against

the wall plate [01].

ÙDO NOT over-tighten the lag

bolts [25].

For assistance in determining wall plate location, see Height Finder at

sanus.com.

Level the wall plate [01] and mark the hole locations.

CAUTION:

Avoid potential injuries or property damage!

Ù Mount the wall plate [01] directly onto the concrete surface.

Ù Minimum solid concrete thickness: 8 in.

Ù Minimum concrete block size: 8 x 8 x 16 in.

[26]

[01]

[25]

[27]

[01]

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 39 40

Comments to this Manuals

No comments

Sanus-systems LF228 User Manual Page 9

Comments to this Manuals

Related products and manuals for TV Accessories Sanus-systems LF228